Firefighting equipment has been evolving over the years, and that evolution has been aided by the rise of unmanned aircraft and drones.
A few years ago, the technology was pretty basic.
You’d have a box that could hold an entire aircraft or a small robot or two, but in recent years, there’s been a resurgence in technology that allows firefighters to operate remotely from the air.
These systems are called unmanned aircraft systems, or UAS, and they’ve been used in places like New York City to keep a fire at bay.
But while they’ve become more common, they’re still relatively new technology, and it’s hard to say if they’ll work as well as traditional aircraft.
That’s why we’ve teamed up with the Fire Fighter Lab to test a new generation that’s designed to protect you and your family from a fire in the field.
Firefighters have been using these unmanned systems for decades to keep them safe from fires in the city.
They can’t be flown, and a lot of their safety features are dependent on the weather.
But now, a new wave of drones are making firefighting a little more affordable.
A lot of these drones, they’ve got the ability to fly from a place like a city or even a remote location like a lake or river.
And with that comes the ability for them to be remotely operated.
It’s a new kind of technology that’s being developed to protect firefighters from fires.
The Fire Fighter Labs’ prototype has been tested with a small number of volunteers.
They used it to help a small fire in New York.
The first thing you notice about this device is how well it does its job.
When it flies, the device fires up the engines and the fire starts.
And the next thing you’ll notice is how quick the fire gets extinguished.
The device is very easy to operate, and the pilot can use a joystick to move it to start the fire.
The firefighters were also able to use it to operate the robot that would take them to a nearby location, pick up some water, and get the water into a canister.
They were able to also use the drone to pick up water from a nearby lake and use it as a can for the water to be pumped into the fire, then pump water back into the canister, and then pump the fire back out.
All of that is done by using the UAS.
But when the Firefighter Lab got a request for firefighting drones, the UAV team had a little problem.
The drone itself wasn’t going to work.
There’s a lot that goes into making it work.
The UAS has to be designed to withstand a lot more than a normal helicopter, which is why we have a very specific design.
We’ve designed the drone for a specific purpose, and so we have to make sure that it’s strong enough to survive a very high-pressure environment like the city we’re working in, but not so strong that it might be damaged by lightning or something.
This is where the Fire Bomber comes in.
The fire bomber is basically a drone that can fly in low-pressure environments, and is designed to fly very quickly, so it can avoid lightning.
And this particular Fire Bomber has a lot going for it.
The pilot is using the joystick to maneuver the drone so it flies very fast, and all the sensors are built into the drone.
It has a very sensitive onboard camera that can monitor a wide area, and when the drone is in the vicinity of a fire, it can fly into the flames, and quickly extinguish the fire without having to use the main engine.
The team tested this drone with a limited number of people and a small group of volunteers, and while the pilot’s experience was fairly good, it’s clear that the firefighting experience with the fire bomber was less than optimal.
The final test was with a much larger group, and we found that the drone was still not able to keep up with a fire that was starting to grow in size.
When we put the drone in motion, the fire began to spread quickly.
We started using the Fire Bombers to help our firefighters out in the worst-case scenario.
One firefighter was able to stop the fire with just a small amount of water, then a few minutes later the fire spread rapidly.
And that was a win for all concerned.
With the UAP, the Fire Fighters can use the drones to keep their firefighters safe, and at the same time, they can also have the UAs operate for them in other ways.
There are two types of UAVs that the Fire fighter can use.
The most common is the Fire Fire Bomber, which will fly into a fire to start it.
And then, the other type of UAS is the UAC, which can fly from anywhere in the world and fly to a fire.
UACs can operate from the ground or the air, and have the ability, for example, to search for water or other